Janome FOUR-DLB (Compact Serger) Overlock Machine

Product Overview

The Four-DLB gives you a wide range of serging features in a compact machine. Its sturdy design and precise Janome stitch mechanism ensures beautiful 3/4 thread operation. The Four-DLB allows you to cut, seam and finish all in one step for a professional result every time - and at up to 1,300 stitches per minute you'll get your work done fast.

To learn more about the 'Janome FOUR-DLB Machine', download the manual here or watch the videos below!

Main Features

3 and 4 Thread Convertible
Easy Lay-in Tension Dials
Threading Chart
Color Coded Thread Guides
Tension Release Lever
Easily Accessible Lower Looper
Quick Change Rolled Hem
Lower Looper Pretension Setting Slider
Easily Retractable Upper Knife
Adjustable Foot Pressure
Snap-on Presser Feet
Adjustable Stitch Length 1mm to 4mm
Differential Feed Ratio 0.5mm to 2.25mm
Adjustable Cutting Width 3.1mm to 7.3mm
Maximum Speed: 1,300 SPM
Electronic foot control

Automatic & Lay-in Thread Tension

Threading the Janome Four-DLB can be achieved easily and efficiently by following the color-coded thread guides on the tension slots. No struggle with wrapping threads around complicated and frustrating dials.

Color Coded Thread Chart

Not sure how to thread your serger? No problem! Threading the Janome Four-DLB has never been easier by simply following the color-coded thread guides and following the color coded thread chart!

Adjustable Differential Feed & Stitch Length

The Janome Four-DLB features adjustable differential feed and adjustable stitch length. The differential feed dial can be found on the right side of the machine for easy access and the diagram makes it straight- forward eliminating any guesswork! The stitch length dial is conveniently located next to the differential feed dial and stitches can be adjusted from 1mm to 4mm, it too has an easy-to-follow diagram printed right next to it.

Included Accessories

General Serger Foot
Screwdriver (large and small)
Tweezers
Set of Needles
Instruction Book
Power Cord

Model Summary

Number of Threads	3_and_4_thread_serger
Type of Tension	Manual_Dials
Presser Foot	Snap-On
Cover Stitch Capability	No
Threading	Easy Lay-In
Pattern Selection Stitch Information Display
Threading Chart	Yes
Color Coded Thread Guides	Yes
Tension Release Lever	Yes
Easily Accessible Lower Looper Guides	No
Changeable Thread Guide	No
Quick Change Rolled Hem	Yes
Lower Looper Pretension Setting Slider	Yes
Cover Stitch Changeover Device	No
Easily Retractable Upper Knife	Yes
Adjustable Foot Pressure	Yes
Built in Two Thread Converter	No
Flip Needle System
Stitch Length Adjustment	1mm to 4mm
Differential Feed Adjustment	0.5mm to 2.25mm
Cutting Width Adjustment	3.1mm to 7.3mm
Maximum Speed	1,300 SPM
Machine Weight	14.3lbs
Dual Voltage 80v - 240v	No
Product Dimensions (L x W x H)	31.1 x 27.9 x 27.1 cm