JANOME EMBROIDERY HOOP A
The Embroidery Hoop A is the 5" x 4.3" hoop that fits all of the machines listed. It comes with the grid template and attachment screw.
For Use With Following Brands and Models:
- Janome: 300E, 350E, MC9500 (Memory Craft), MC9700 (Memory Craft), MC10000 (Memory Craft), MC10001 (Memory Craft)
- Kenmore: 19005, 19010
- Elna: 8200, 8300, 8600
- Bernina: Deco 330, Deco 340
JANOME EMBROIDERY HOOP B
Janome Embroidery Hoop B is the large hoop that comes with the Memory Craft Embroidery machines. It has a maximum sewing area of 5.5 inches by 7.9 inches.
- Fits these Janome models: 300E, 350E, 9500, 9700, 10000, 10001
- Bernina: Deco 330/340
- Elna: 8200, 8300, 8600 Embroidery Machine
JANOME EMBROIDERY RE18 ESSENTIAL HOOP KIT
The Janome Essential RE18 Hoop measures 5.5” x 7” or 140mm x 180mm, the perfect size for most embroidery designs. The Janome Essential RE18 Hoop includes hoop template and magnet clamps (4pcs). Free USB stick with 50 bonus embroidery designs. The Essential RE18 is for use with:
- Janome Horizon Memory Craft 15000, 14000 and 12000 (MC12000, MC14000 and Janome MC15000).
JANOME EMBROIDERY HOOP ST 125MM X 110MM
The Janome Standard Hoop with template measuring 5" x 4" (125mm x 110mm) - the optimum size for 80% of commercial embroidery designs. The template is included with hoop. This template is clear plastic with a grid that helps in getting that perfect alignment for your embroidery designs. This hoop is compatible with:
- Janome MC11000 & MC11000SE
- Elna 9600, e9500
JANOME GIGA HOOP D
The Giga Hoop has taken legendary Janome stitch quality to new dimensions - 9.1" X 7.9" to be exact. Big designs and multiple design layouts can be stitched without re-hooping. To use the Giga Hoop to its maximum potential you will also need to purchase the Janome Customizer 10000 Plus software (sold separately). This software will allow you to layout designs for the full width of the hoop allowing you to truly create a "Giga design".
This is a Generic Hoop, included is the Frame & Plastic Template Big designs and multiple design layouts can be stitched without re-hooping. To maximize your Giga Hoop experience, Works with the following machines:
- Bernina Deco 330, 340
- Janome MC 300, MC 350, MC 9500, 9700, 1000, 10001
- Elna 8200, 8300 & 8600
JANOME MEMORY CRAFT 11000 FREE ARM HOOP (FA)
The Janome Free Arm (FA) Hoop is designed to fit the Memory Craft 11000 and the Memory Craft 11000 Special Edition (11000SE, MC11000). The Free Arm hoop is 2" x 2" (50mm x 50mm) and is made so that you can take advantage of Janome's ability to use the free arm on their embroidery machine while doing embroidery. This hoop is great to use when doing a small project. For example, embroidering on cuffs, collars, pants leg and other tight spaces where you'd normally have to take the item apart. Small gives you big new possibilities!
- Also works with Elna 9500
JANOME ROUND HOOP #3 with TEMPLATE
This large, round hoop can be used for any application. It is particularly useful for embroidering on towels or very thick fabric, or quilting. Inside diameter is 7". This round embroidery frame is designed to fit the following makes and models:
- Elna 9006, 8000, 8006, 8007, CE20
- Janome 5000, Janome 5700, Janome 9000
JANOME FREE ARM EMBROIDERY HOOP (C Hoop)
This Free Arm Hoop (otherwise referred to as the C Hoop) is a 2" × 2" (5cm x 5cm) hoop designed for easy embroidering inside of the sleeve of a shirt or the leg of a pair of pants. The curved design of the hoop holder allows you to take full advantage of the free arm on the sewing machine when embroidering in hard-to-reach places. Allows you to embroider in the difficult and hard-to-reach areas like cuffs, pant legs, and children’s clothes without having to take apart seams. Conveniently sized for initials and monogram work, the Janome Free Arm Embroidery Hoop is a great addition to your embroidery toolbox. For use with:
- Janome Memory Craft MC 300, 350, 350E, 9500, 9700, 10000, 10001
- Bernina Deco 330/340, 830, 840
- Elna 8200, 8300 & 8600 Embroidery Machine
AcuFil HOOP AQ
The new AcuFil™ Quilting Hoop is not only the fastest hoop you’ve ever used, it also allows you to move your fabric in any direction while continuing your design. The inner hoop has been replaced by 6 special magnetic clamps, which hold the multiple layers of your quilt firmly in place but allow you to quickly re-hoop.
Hoop size: 8" x 5.5" (200 x 140mm)
This accessory works with the following models:
- Memory Craft 11000 Special Edition
- Memory Craft 11000
EMBROIDERY HOOP 5 WITH TEMPLATE, Sliding Multi-Position
This is the Multi-Position Sliding hoop for Janome and Elna machines. The hoop size is 7" X 7 1/4". It will allow you to do 2 designs without moving the fabric in the hoop. For use with:
- Elna Sewing Machine Models: 8000, 8006, 8007, CE20
- Janome Sewing Machine Models: HF8100, Memory Craft (MC) 5000, 5700, 9000
JANOME MC11000 MACRO HOOP (MA) WITH TEMPLATE
Janome's Macro (MA) Hoop is designed to fit both the Janome Memory Craft 11000 and the Memory Craft 11000 Special Edition. This hoop is 7 7/8" x 11" (200mm x 280mm) and is used to sew larger embroidery designs without having to re-hoop the material. This hoop is an “overlap” or multi-position hoop which has a 200 x 280 mm area. Designs need to be created or downloaded which are specifically intended for use with the Macro Hoop as they are split into sections with each section being stitched separately. This hoop is complete with a grid template.