Brother Multi-Function Foot Controller Unit for V-Series & XV (SAMFFCC)

Use this two-pedal, multi-function foot controller to control up to three different sewing functions, all with the press of your foot. Allows you to operate your machine while still holding on to your project with two hands. Simply replace the single-pedal, single-function foot controller included with your machine with this multi-function controller, then program the foot controller functions through the LCD display on your machine. This two-pedal controller can be set to control thread cutting, single stitch sewing, reverse stitch sewing and moving the needle up and down. The small pedal can be set to control one function, and the larger pedal can be set to control two functions. The SAMFFCC foot controller is for DreamCreator VQ2400, DreamCreator XE VM5100, DreamWeaver VQ3000, DreamWeaver XE VM6200D, The Dream Machine 2 Innov-is XV8550D and The Dream Machine Innov-is XV8500D etc.

Click here to find out how to use the multi-function foot controller.

Select any of the following:

• Thread Cutting
• Needle Position UP/DOWN
• Single Stitch
• *Reverse Stitch (Reinforcement Stitch)

* Reverse Stitch (Reinforcement Stitch): If you set the "Reverse Stitch" function on the heel switch, machine operates the same as pressing the "Reverse Button" on the machine.

Reinforcement stitching may be applied depending on the selected stitch pattern.

For use with: 

• V-series (VM6200D/VQ3000/VM5100/VM5200/VQ2400/V5/V7/VQ2/VR)
• Dream Machine (XV8500D/XV8550D/XV)
• Stellaire XJ1
• Luminaire (XP1/XP2)

AUTHORIZED DEALER