Janome Circular Sewing Attachment (Easy-Set Bobbin Machines)

The Circular sewing attachment is the ideal attachment for sewing circles using either straight stitch, zig-zag, decorative stitches or even lettering. Circles up to 26cm in diameter are stitched perfectly using this very popular attachment so essential for craft and decorative work.

The device slots into place where your bobbin cover would go on compatible models, while a spindle slides to the left to your desired radius. Placing the centre of your embroidery design or patch on the spindle, the circular attachment anchors your work on a pivot, allowing the feed dogs to move the fabric and sewing a perfect circle! Before starting sewing, it is worth protecting the fabric against stretching, e.g. by gluing it with a layer of interlining to avoid the situation when the beginning and end of the circle do not meet.

• Instructions included.
• Circles up to 26 cm radius.
• Made in Japan
• Note: This unit will only work with newer models with Easy Set Bobbin Needle plates

Replacement set screw use part #: 660106001

This accessory will fit on Janome Top loading machines with easy set bobbin (hook cover plate part number: 809136100 - as shown in the picture below)

Which Category feet does my machine take? A-1, A-2, B, C-1, C-2, D-1 or D-2?

To understand whether your machine is low shank or high shank, view the Presser Foot Guide here.

Guaranteed to fit Janome Sewing Machine Models:

MC15000, MC15000V3, MC14000, Horizon - MC8900QCP Special Edition, MC8200QCP Special Edition, MC8200QCP SE, MC9900, MC9450QCP, MC9400QCP, MC6700P, MC6650, Continental M7 Professional (CM7P), Atelier 3, Atelier 5, Atelier 7, Atelier 9, Skyline S3, Skyline S5, Skyline S6, Skyline S7, Skyline S9, Memory Craft 9850, Memory Craft 9900, MC400E, MC500E, M7050, M7100, DM7200, DC7100, DC6100, DC6030, DC6050, DC2015, Jubilee 60809, 5300QDC, 5300QDC-T, 5060DC, 5270QDC, Sewist 780DC

Guaranteed to fit Elna Sewing Machine Models:

eXperience 550, eXperience 560, eXperience 570, eXcellence 680+ (Skyline S5 equivalent), eXcellence 720PRO (MC6700P equivalent), eXcellence 730PRO (MC8200QCP SE equivalent), eXcellence 760 (MC8900QCP equivalent), eXcellence 760PRO (MC8900QCP equivalent), eXcellence 780+ (9400QCP equivalent), eXpressive 830, eXpressive 860 (MC9900 equivalent), eXpressive 920 (MC14000 equivalent)

Guaranteed to fit Necchi Sewing Machine Models: EX100, EX60, EX30

Will work with hook cover plate part number: 809136100

AUTHORIZED DEALER